| Operating voltage: | 14-30V dc |
| Reverse voltage: | 60V max. |
| Current: | 18 to 22mA |
| Output: | Typical at 150mm: |
| Red | 190 lux |
| Amber | 150 lux |
| Green | 250 lux |
| Blue | 150 lux |
| White | 300 lux |
| Ingress protection: | Front IP66 – Rear IP20 – see accessories foroptional IP65 rear sealing assembly. |
| Rating: | Continuous |
| Housing material: | Nylon 6 |
| Lens material: | Polycarbonate |
| Mounting: | Panel mount – 22.5mm |
| Terminals: | Screw clamp for 1.5mm2 |
| Operating temp: | 20 to 60°C [68°to 140°F] |
| Storage temp: | 40 to 85°C [104° to 185°F] |
| Relative humidity: | 5 to 95% non condensing |
| Weight: | 20g / 0.04Ibs |
| Part Code: | Identifier: | Description: |
|---|---|---|
| IS-pB1 – [x] | ||
| ATEX | II 1G Ex ia IIC T4 | |
| IECEx | Ga Ex ia IIC T4 | |
| FM | CL I: Div 1: GP A B C & D: T4 @ 60°C CL I: Div 2: GP A B C & D: T4 @ 60°C | |
| [x]: L.E.D. colour: | A: Amber R: Red B: Blue G: Green W: White | |
| One or two IS-pB1 lamps may be powered from any Ex ia IIC certified Zener barrier or galvanic isolator whose output safety parameters do not exceed: Uo 30V dc Po 1.3W at 40°C Po 1.2W at 60°C(e.g. 28V, 300Ω or 28V, 234Ω Zener barrier or galvanic isolatorGas groups IIA, IIB or IICLocation Zone 0, 1 or 2 | ||
| Up to four IS-pB1 lamps may be powered from any certified Ex ia IIB Zener barrier or galvanic isolator whose output safety parameters do not exceed:Uo 30V dc Po 1.3W at 40°CGas groups IIA or IIBLocation Zone 0, 1 or 2 |
