| Datasheet | Download |
| INMETRO Installation Manual | Download |
| IECEx certificate | Download |
| ATEX certificate | Download |
| UL certificate of compliance | Download |
| UKCA Certificate | Download |
| INMETRO certificate | Download |
| Ex EAC TR CU 012/2011 Certificate | Download |
| CCOE PESO | Download |
| DNV Type Approval | Download |
| ECAS Ex Approval | Download |
| Ingress Protection certificate | Download |
| Ingress Protection certificate | Download |
| Declaration of Conformity | Download |
| Declaration of Conformity UKCA | Download |
| 2D drawing (PDF) | Download |
| 2D drawing (DWG) | Download |
| 3D drawing (STEP) | Download |
| Wiring Schematic | Download |
| Nameplate Drawing | Download |
| Equipment Tag Drawing | Download |
| Duty Label Drawing | Download |
| Pole Mount & Sun Shade Drawing | Download |
| Source: | Array of 4 x High Power Cree® LED’s |
| Modes: | 1Hz flash (60 fpm) 1.5Hz flash (90 fpm) 2Hz flash (120 fpm) Double strike flash Triple strike flash High Power Steady Low Power Steady |
| Eff. Intensity cd: | 338 cd – 1Hz flash 174 cd – High Power Steady |
| Lens colours: | Amber, Blue, Clear, Green, Magenta, Red & Yellow |
| Voltage DC: | 24Vdc (18-30Vdc) |
| Voltage AC: | 115Vac (110-120Vac), 230Vac (220-240Vac) |
| In-rush @ 24Vdc: | 1890mA within 0.22ms |
| LED life: | 60,000 hours+ |
| Safety Integrity Level: | SIL1 and SIL2 Route 2H IEC61508 (2010) |
| Ingress protection: | IP rating per EN60529:IP66/67 Type rating per UL50E/NEMA250:4/4X/3R/13 |
| Lens material: | High impact Borosilicate glass |
| Enclosure material: | 316L Stainless Steel |
| Enclosure colour: | Red |
| Enclosure finish: | Chromate & powder coated finish ISO 12944-6 CX, C5VH & C5H |
| Cable entries: | Side: 4 x M20x1.5mm Stopping plugs included |
| Stopping plugs: | Stainless Steel |
| Terminals: | 0.5 – 2.5mm² (20-14 AWG) Duplicated terminals |
| Ground/Earth stud: | M5 |
| Line monitoring: | Blocking diode included EOL Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor or diode (DC versions) can be fitted Blocking diode included EOL Min. 500 Ohm 2W, or 3k3 Ohm 0.5W resistor or diode (DC versions) can be fitted |
| Enclosure volume: | <2 litres |
| Installation temp: | -50° to +85°C (-58°F to +185°F) |
| Storage temp: | -50° to +85°C (-58°F to +185°F) |
| Relative humidity: | 99% – tropicalised/conformal coated electronics |
| Weight: | 6.0kg/13.23lbs |
| Note | *All candela data is representative of performance with clear lens at optimum voltage. |
| Part Code: | Identifier: | Description: |
|---|---|---|
| Product type: | STExB2 | |
| Type: | LD2 | LED Multifunction Beacon |
| Voltage: | DC024 AC115 AC230 | 24Vdc (18-30Vdc) 115Vac (110-120Vac) 230Vac (220-240Vac) |
| Cable entries: [e] | A B C D E F G H I J | 4 x M20x1.5mm 2 × 1/2" NPT – adaptors 2 × 3/4" NPT – adaptors 2 x M25x1.5mm – adaptors 1 × 1/2" NPT – adaptor 1 × 3/4" NPT – adaptor 1 x M25x1.5mm – adaptor 3 × 1/2" NPT – adaptors 3 × 3/4" NPT – adaptors 3 x M25x1.5mm – adaptors |
| Stopping plug/adaptor material: [m] | S | Stainless Steel |
| Guard material:[s] | 1 3 5 | A4 316 Stainless Steel A4 316 St/St with Equip. Tag A4 316 St/St with Equip. Tag and Duty Label |
| Product version: [v] | A M | UL, cUL, IECEx, ATEX, Ex EAC, INMETRO SIL1 & SIL2 IECEx, ATEX, Ex EAC, INMETRO, DNV SIL1 & SIL2 – 24Vdc only |
| Product option: [o] | 1 X | Standard product Custom configuration – contact E2S |
| Enclosure colour: [x] | R S | Red Special colour – contact E2S |
| Lens colour: [y] | A B C G M R Y | Amber Blue Clear Green Magenta Red Yellow |
| Accessories:SP65-0001-A4SP65-0003-A4 | Pole Mount Bracket Kit St/St A4 (316) Sunshade – St/St A4 (316) |
| NominalVoltage: | Voltagerange: | Steady High PowerNominal current: | Steady Low PowerNominal current: | Flashing 1HzNominal current: | Max.current: | In rush: |
|---|---|---|---|---|---|---|
| 24Vdc | 18-30Vdc | 240mA | 134mA | 110mA | 500mA | 1890mA <0.22ms |
| 115Vac | 110-120Vac 50/60Hz | 95mA | 78mA | 90mA | 180mA | 11150mA < 12ms |
| 230Vac | 220-240Vac 50/60Hz | 48mA | 37mA | 45mA | 100mA | 670mA <12ms |
| Amber | Blue | Clear | Green | Magenta | Red | Yellow |
| 0.59 | 0.27 | 1.00 | 0.51 | 0.34 | 0.15 | 0.85 |
| Stage 1:[On board] | Stage 2:[Remote] | Stage 3:[Remote] |
|---|---|---|
| Steady High Power | Flashing 1Hz | Triple Strike |
| Steady Low Power | Flashing 1Hz | Triple Strike |
| Flashing 1Hz | 2x Flash 2Hz | Triple Strike |
| Flashing 1.5Hz | Flashing 2Hz | Double Strike |
| Flashing 2Hz | Triple Strike | Triple Strike |
| Double Strike | Steady High Power | Triple Strike |
| Triple Strike | Flashing 2Hz | Double Strike |
| Note: Remote second and third stage on DC units only | ||
| Double strike: 150ms on, 150ms off x 2, 600ms off Triple strike: 150ms on, 150ms off x 3, 600ms off | ||